ZyXEL Communications XS1920 Series, User Manual

Page: 349 / 422

Chapter 40 Access Control
XS1920 Series User’s Guide
349
• An administrator is someone who can both view and configure Switch changes. The username for
the Administrator is always admin . The default administrator password is 1234 .
Note: It is highly recommended that you change the default administrator password
( 1234 ).
• A non-administrator (username is something other than admin ) is someone who can view but
not configure Switch settings.
Click Management > Access Control > Logins to view the screen as shown.
Figure 246
Management > Access Control > Logins
The following table describes the labels in this screen.
Table 182
Management > Access Control > Logins
LABEL DESCRIPTION
Administrator
This is the default administrator account with the “admin” user name. You cannot change the default
administrator user name. Only the administrator has read/write access.
Old Password Type the existing system password ( 1234 is the default password when shipped).
New Password Enter your new system password.
Retype to
confirm
Retype your new system password for confirmation
Edit Logins
You may configure passwords for up to four users. These users have read-only access.
User Name Set a user name (up to 32 ASCII characters long).
Password Enter your new system password.
Retype to
confirm
Retype your new system password for confirmation