ZyXEL Communications XS1920 Series User Manual Download Page 149

Page: 149 / 422

Chapter 17 Link Aggregation

XS1920 Series User’s Guide

149

is, if an operational port fails, then one of the “standby” ports become operational without user
intervention. Please note that:

• You must connect all ports point-to-point to the same Ethernet switch and configure the ports for

LACP trunking.

• LACP only works on full-duplex links.
• All ports in the same trunk group must have the same media type, speed, duplex mode and flow

control settings.

Configure trunk groups or LACP before you connect the Ethernet switch to avoid causing network
topology loops.

Link Aggregation ID

LACP aggregation ID consists of the following information:

Port Priority and Port Number are 0 as it is the aggregator ID for the trunk group, not the individual
port

17.2 Link Aggregation Status

Click

Advanced Application

Link Aggregation

in the navigation panel. The

Link Aggregation

Status

screen displays by default. See

Section 17.1 on page 148

for more information.

Figure 103

Advanced Application > Link Aggregation Status

Table 61

Link Aggregation ID: Local Switch

SYSTEM PRIORITY MAC ADDRESS

KEY

PORT PRIORITY

PORT NUMBER

0000

00-00-00-00-00-00

0000

Table 62

Link Aggregation ID: Peer Switch

SYSTEM PRIORITY MAC ADDRESS

KEY

PORT PRIORITY

PORT NUMBER

0000

00-00-00-00-00-00

0000

Summary of Contents for XS1920 Series







































































































































































































































































































































































































































Search results

Summary of Contents for XS1920 Series

Reviews:

Brands by name

Popular brands

ZyXEL Communications XS1920 Series, User Manual

Search results

Summary of Contents for XS1920 Series

Reviews:

Brands by name

Popular brands