Chapter 49 Port Status
XGS1930 Series User’s Guide
353
Figure 260
Management > Port Status > Port Details
The following table describes the labels in this screen.
Table 185 Management > Port Status > Port Details
LABEL
DESCRIPTION
Port Info
Port NO.
This field displays the port number you are viewing.
Name
This field displays the name of the port.
Link
This field displays the speed (such as
100M
for 100Mbps,
1G
for 1000 Mbps or 1 Gbps, or
10G
for 10
Gbps) and the duplex (
F
for full duplex). It also shows the cable type (
Copper
or
Fiber
) for the
combo ports. This field displays
Down
if the port is not connected to any device.
State
If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port.
If STP is disabled, this field displays
FORWARDING
if the link is up, otherwise, it displays
STOP
.
When LACP (Link Aggregation Control Protocol), STP, and dot1x are in blocking state, it displays
Blocking
.
LACP
This field shows if LACP is enabled on this port or not.
TxPkts
This field shows the number of transmitted frames on this port.
RxPkts
This field shows the number of received frames on this port.
Errors
This field shows the number of received errors on this port.
Tx kB/s
This field shows the number of kilobytes per second transmitted on this port.
Summary of Contents for XGS1930-28HP
Page 19: ...19 PART I User s Guide...
Page 39: ...39 PART II Technical Reference...
