Chapter 17 Link Aggregation
XGS1930 Series User’s Guide
159
operational port fails, then one of the “standby” ports become operational without user intervention.
Please note that:
• You must connect all ports point-to-point to the same Ethernet switch and configure the ports for
LACP trunking.
• LACP only works on full-duplex links.
• All ports in the same trunk group must have the same media type, speed, duplex mode and flow
control settings.
Configure trunk groups or LACP before you connect the Ethernet switch to avoid causing network
topology loops.
Link Aggregation ID
LACP aggregation ID consists of the following information
1
:
17.2 Link Aggregation Status
Click
Advanced Application
>
Link Aggregation
in the navigation panel. The
Link Aggregation Status
screen displays by default. See
for more information.
Figure 119
Advanced Application > Link Aggregation Status
Table 70 Link Aggregation ID: Local Switch
SYSTEM PRIORITY
MAC ADDRESS
KEY
PORT PRIORITY
PORT NUMBER
0000
00-00-00-00-00-00
0000
00
0000
Table 71 Link Aggregation ID: Peer Switch
SYSTEM PRIORITY
MAC ADDRESS
KEY
PORT PRIORITY
PORT NUMBER
0000
00-00-00-00-00-00
0000
00
0000
1.
Port Priority and Port Number are 0 as it is the aggregator ID for the trunk group, not the individual port.
Summary of Contents for XGS1930-28HP
Page 19: ...19 PART I User s Guide...
Page 39: ...39 PART II Technical Reference...
