ZyXEL Communications XGS1930-28HP, User Manual

Page: 79 / 397

Chapter 7 Status
XGS1930 Series User’s Guide
79
System Name This shows the system name of the neighbor device.
Model This shows the model name of the neighbor device. This field will show “ – ” for devices that
do not support the ZON utility.
Firmware This shows the firmware version of the neighbor device. This field will show “ – ” for devices
that do not support the ZON utility.
MAC This shows the MAC address of the neighbor device.
IPv4 This shows the IPv4 address of the neighbor device. The IPv4 address is a hyper link that
you can click to log into and manage the neighbor device through its Web Configurator.
IPv6 This shows the IPv6 address of the neighbor device. The IPv6 address is a hyper link that
you can click to log into and manage the neighbor device through its Web Configurator.
Port This show the number of the neighbor device’s port which is connected to the Switch.
Desc. This shows the description of the neighbor device’s port which is connected to the
Switch.
Location This shows the geographic location of the neighbor device. This field will show “ – ” for
devices that do not support the ZON utility.
Reset to Default Click the Reset button to reset the neighbor device to its factory default settings. A
warning message “ Are you sure you want to load factory default? ” appears prompting
you to confirm the action. After confirming the action a count down button (from 5 to 0)
starts.
Note:
• The Switch must support power sourcing (PSE) or the network device is a powered
device (PD).
• If multiple neighbor devices use the same port, the Reset button is not available.
• You can only reset Zyxel powered devices that support the ZON utility.
Table 21 Status > Neighbor > Neighbor Detail (continued)
LABEL DESCRIPTION