Chapter 9 VLAN
XGS1930 Series User’s Guide
124
• a tagged voice packet when the incoming port and VLAN tag belongs to a voice VLAN.
It then checks the source packet’s MAC address against an OUI list. If a match is found, the packet is
considered as a voice packet.
You can set priority level to the Voice VLAN and add MAC address of IP phones from specific
manufacturers by using its ID from the Organizationally Unique Identifiers (OUI).
Click the
Voice VLAN Setup
link in the
VLAN Configuration
screen to display the configuration screen as
shown.
Figure 95
Advanced Application > VLAN > VLAN Configuration > Voice VLAN Setup
The following table describes the fields in the above screen.
Table 53 Advanced Application > VLAN > VLAN Configuration > Voice VLAN Setup
LABEL
DESCRIPTION
Voice VLAN Global Setup
Voice VLAN
Click the second radio button if you want to enable the Voice VLAN feature. Enter a
VLAN ID number that is associated with the Voice VLAN.
Click the
Disable
radio button if you do not want to enable the Voice VLAN feature.
Priority
Select the priority level of the voice traffic from 0 to 7. Default setting is 5. The higher the
numeric value you assign, the higher the priority for this voice traffic.
Apply
Click
Apply
to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the
Save
link on the top navigation panel
to save your changes to the non-volatile memory when you are done configuring.
Cancel
Click
Cancel
to begin configuring this section afresh.
Clear
Click
Clear
to reset the fields to default settings.
Voice VLAN OUI Setup
OUI address
Enter the IP phone manufacturer’s OUI MAC address. The first 3 bytes is the manufacturer
identifier, the last 3 bytes is a unique station ID.
Summary of Contents for XGS1930-28HP
Page 19: ...19 PART I User s Guide...
Page 39: ...39 PART II Technical Reference...
