Chapter 25 AAA
XGS1930 Series User’s Guide
204
Figure 148
Advanced Application > AAA > RADIUS Server Setup
The following table describes the labels in this screen.
Table 94 Advanced Application > AAA > RADIUS Server Setup
LABEL
DESCRIPTION
Authentication
Server
Use this section to configure your RADIUS authentication settings.
Mode
This field is only valid if you configure multiple RADIUS servers.
Select
index-priority
and the Switch tries to authenticate with the first configured RADIUS server,
if the RADIUS server does not respond then the Switch tries to authenticate with the second
RADIUS server.
Select
round-robin
to alternate between the RADIUS servers that it sends authentication
requests to.
Timeout
Specify the amount of time in seconds that the Switch waits for an authentication request
response from the RADIUS server.
If you are using
index-priority
for your authentication and you are using two RADIUS servers
then the timeout value is divided between the two RADIUS servers. For example, if you set the
timeout value to 30 seconds, then the Switch waits for a response from the first RADIUS server for
15 seconds and then tries the second RADIUS server.
Index
This is a read-only number representing a RADIUS server entry.
IP Address
Enter the IP address of an external RADIUS server in dotted decimal notation.
UDP Port
The default port of a RADIUS server for authentication is
1812
. You need not change this value
unless your network administrator instructs you to do so.
Summary of Contents for XGS1930-28HP
Page 19: ...19 PART I User s Guide...
Page 39: ...39 PART II Technical Reference...
