Chapter 6 Tutorial
XGS1930 Series User’s Guide
70
2
Go to
Basic Setting
>
Switch Setup
and set the VLAN type to
802.1Q
. Click
Apply
to save the settings to
the run-time memory.
Figure 50
Tutorial: Set VLAN Type to 802.1Q
3
Click
Advanced Application
>
VLAN
>
VLAN Configuration
>
Static VLAN Setup
.
4
In the
Static VLAN
screen, select
ACTIVE
, enter a descriptive name (VLAN 102 for example) in the
Name
field and enter 102 in the
VLAN Group ID
field.
5
Select
Fixed
to configure port 2 to be a permanent member of this VLAN.
6
Clear the
TX Tagging
check box to set the Switch to remove VLAN tags before sending.
7
Click
Add
to save the settings to the run-time memory. Settings in the run-time memory are lost when the
Switch’s power is turned off.
Summary of Contents for XGS1930-28HP
Page 19: ...19 PART I User s Guide...
Page 39: ...39 PART II Technical Reference...
