ZyXEL Communications OLT-1308 User Manual Download Page 62

Page: 62 / 314

Chapter 6 System Status and Port Statistics

OLT-1308 Series User’s Guide

6.2.1 EPON Info

Click a number (1 to 8) in the

Port

column in the

Status

screen to display general fiber port

information. Use this screen to check the status and general performance data on connections
to the ONUs.

Figure 19

Status: EPON Info

The following table describes the labels in this screen.

Poll Interval(s)

The text box displays how often (in seconds) this screen refreshes. You may change

the refresh interval by typing a new number in the text box and then clicking

Set

Interval

Stop

Click

Stop

to halt system statistic polling.

Table 8

Status: OLT-1308H (continued)

LABEL

DESCRIPTION

Table 9

Status: EPON Info

LABEL

DESCRIPTION

Status

Click this link to return to the main

Status

screen.

Port No

This field displays the EPON port index number.

Number of

LLID

This field displays the number of connections to the client devices on this port.

LLID

This field displays the index number of a logical link. Each LLID (Logical Link ID)

denotes a connection to an ONU.

Status

This field shows the logical link status.
This field displays

if an ONU is connected.

This field displays

Down

if an ONU is not connected or is not ready.

This field displays

Testing

if you are performing s diagnostic test on the link (using the

Diagnostic

screen).

The following lists the five Up states:

Normal

- when the ONU is transmitting traffic.

Queuing

- when the ONU is waiting for the firmware upgrade.

Upgrading

- when the ONU is upgrading its firmware.

Upgrade Fail

- ONU firmware upgrade has failed. In this case, reset the ONU.

Upgrade Success

- ONU firmware upgrade is completed without errors. The ONU will

restart automatically and the state changes to

Normal

MAC Address This field displays the MAC address of the ONU on this logical link.

Summary of Contents for OLT-1308



























































































































































































































































































































Search results

Summary of Contents for OLT-1308

Reviews:

ZyXEL Communications OLT-1308, User Manual, Page: 62 / 314

Search results

Summary of Contents for OLT-1308

Reviews: