manualshive.com logo in svg

ZyXEL Communications OLT-1308, User Manual, Page: 219 / 314

Share
Download
ZyXEL Communications OLT-1308 User Manual Download Page 219

OLT-1308 Series User’s Guide

219

C

H A P T E R

 

 33 

Cluster Management

This chapter introduces cluster management.

33.1  Introduction to Cluster Management 

Cluster Management

3

 allows you to manage switches through one switch, called the cluster 

manager. The switches must be directly connected and be in the same VLAN group so as to be 
able to communicate with one another.  

In the following example, switch A in the basement is the cluster manager and the other 
switches on the upper floors of the building are cluster members.

Figure 114   

Clustering Application Example 

3.

 Cluster management may also be referred to as “iStacking” in other ZyXEL documentation.

Table 81   

ZyXEL Clustering Management Specifications

Maximum number of cluster 

members

24

Cluster Member Models

Must be compatible with ZyXEL cluster management 

implementation.

Cluster Manager

The switch through which you manage the cluster member 

switches.

Cluster Members

The switches being managed by the cluster manager switch.

Summary of Contents for OLT-1308



























































































































































































































































































































Reviews:

No comments