ZyXEL Communications OLT-1308 User Manual Download Page 242

Page: 242 / 314

Chapter 37 Introducing the Commands

OLT-1308 Series User’s Guide

242

logout

Exits from the CLI.

mac-flush

Clears the MAC address table.

<port-num>

Removes all learned MAC address on the specified

port(s).

ping

<IP|host-
name>

[in-band|out-
of-band|vlan
<vlan-id> ][
size <0-1472>
][ -t ]

Sends Ping request to an Ethernet device.

help

Displays command help information.

show

classifier-
filter-
profile

Displays the classifier filter profile summary table.

dba-mode

Displays the dynamic bandwidth allocation mode the

OLT is using.

epon

Displays the PON port status.

<port-number>

Displays ONU information on the specified PON port.

<port-number>
<llid>

Displays the ONU status on a logical link on the specified

PON port.

epon-counter <port-number>

Displays the port statistics of the specified PON port.

<port-number>
<llid>

Displays the connection statistics of the ONU on the

specified logical link.

onu <port-
number> <llid>

Displays ONU connection counters.

epon-da-
filter

<port-number>

Displays destination address (DA) filter(s) configured on

the specified port.

epon-profile

Displays the EPON profile summary table.

hardware-
monitor <C|F>

Displays the hardware temperature and statistics.

igmp-group

Displays the IGMP table.

<port-number>

Displays the IGMP table on the specified PON port.

<port-number>
<llid>

Displays the IGMP table for the specified logical link.

Displays the IP settings.

onu

Displays ONU information.

<port-number>

Displays ONU information on the specified PON port.

p2p-access

Displays the p2p port number(s).

port-access-
authenticator

Displays port authentication settings on all ports.

<port-list>

Displays port authentication settings on the specified

port.

priority-
profile

Displays the priority profile summary table.

queue-mapping

Displays the queue mappings.

Table 89

Command Summary: User Mode (continued)

COMMAND

DESCRIPTION

Summary of Contents for OLT-1308



























































































































































































































































































































Search results

Summary of Contents for OLT-1308

Reviews:

ZyXEL Communications OLT-1308, User Manual, Page: 242 / 314

Search results

Summary of Contents for OLT-1308

Reviews: