ZyXEL Communications OLT-1308, User Manual, Page: 199 / 314

Chapter 29 Maintenance
OLT-1308 Series User’s Guide
199
29.10.2 FTP Command Line Procedure
1 Launch the FTP client on your computer.
2 Enter
open
, followed by a space and the IP address of your OLT.
3 Press [ENTER] when prompted for a username.
4 Enter your password as requested (the default is “1234”).
5 Enter
bin
to set transfer mode to binary.
6 Use
put
to transfer files from the computer to the OLT, for example,
put
firmware.bin ras
transfers the firmware on your computer (firmware.bin) to the
OLT and renames it to “ras”. Similarly,
put config.cfg config
transfers the
configuration file on your computer (config.cfg) to the OLT and renames it to “config”.
Likewise
get config config.cfg
transfers the configuration file on the OLT to your
computer and renames it to “config.cfg”. See Table 69 on page 198 for more information
on filename conventions.
7 Enter
quit
to exit the ftp prompt.
29.10.3 GUI-based FTP Clients
The following table describes some of the commands that you may see in GUI-based FTP
clients.
29.10.4 FTP Restrictions
FTP will not work when:
• FTP service is disabled in the Access Control screen.
• The IP address(es) in the Secured Client Set in the Remote Management screen does not
match the client IP address. If it does not match, the OLT will disconnect the Telnet
session immediately.
General Commands for GUI-based FTP Clients
COMMAND DESCRIPTION
Host Address Enter the address of the host server.
Login Type Anonymous.
This is when a user I.D. and password is automatically supplied to the server
for anonymous access. Anonymous logins will work only if your ISP or service
administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer Type Transfer files in either ASCII (plain text format) or in binary mode.
Configuration and firmware files should be transferred in binary mode.
Initial Remote
Directory
Specify the default remote directory (path).
Initial Local Directory Specify the default local directory (path).