ZyXEL Communications OLT-1308 User Manual Download Page 250

Page: 250 / 314

Chapter 37 Introducing the Commands

OLT-1308 Series User’s Guide

250

helper-address
<remote-dhcp-server1>

[remote-dhcp-
server2] [remote-
dhcp-server3]

Sets the IP addresses of up to

3 DHCP servers.

information
<string>

Specifies the agent information

the device to add to DHCP

requests.

option

Sets the device to add DHCP

relay agent information.

end

epon-common

Enters the epon-common

mode. Refer to

Section 37.10.5

on page 260

for the available

commands.

epon-da-filter port

<port-number>

name <name> onu <onu-
name> mac <mac-addr>
action <discard|pass>

Configures a destination filter to

allow/block traffic to the

specified destination MAC

address.

inactive

Disables a destination filter.

epon-mac-forward port <port-number>

name <name> onu <onu-
name> mac <mac-addr>

Configures a static MAC

address forwarding rule.

inactive

Disables a static MAC address

forwarding rule.

epon-profle <name>

Sets a descriptive name for an

epon profile and enters the

epon-profile mode.
See

Section 37.10.6 on page

261

for the available

commands.

exit

Exits from the CLI.

garp

join <100-65535> leave
<msec> leaveall <msec>

Configures GARP time

settings.

help

Displays help information.

history

Displays a list of previous

command(s) that you have

executed.

hostname <name_string>

Sets the OLT’s name for

identification purposes.

https

cert-regeneration
<rsa|dsa>

Re-generates a certificate.

timeout <0-65535>

Sets the HTTPS timeout period.

igmp-filtering

Enables IGMP filtering.

<profile name> start-
address <ip> end-
address <ip>

Sets the starting and ending

IGMP addresses.

igmp-snooping

Enables IGMP snooping.

unknown-multicast-
frame <drop|flooding>

Sets the action on unknown

multicast frames received.

Table 91

Command Summary: Configuration Mode (continued)

COMMAND

DESCRIPTION

Summary of Contents for OLT-1308



























































































































































































































































































































Search results

Summary of Contents for OLT-1308

Reviews:

ZyXEL Communications OLT-1308, User Manual, Page: 250 / 314

Search results

Summary of Contents for OLT-1308

Reviews: