ZyXEL Communications OLT-1308, User Manual, Page: 264 / 314

Chapter 37 Introducing the Commands
OLT-1308 Series User’s Guide
264
igmp-group-
limit
Enables the IGMP group limiting feature.
number <number>
Sets the maximum number IGMP groups
allowed.
igmp-
immediate-
leave
Enables the IGMP immediate leave
function.
igmp-querier-
mode
<auto|fixed|ed
ge>
Sets the IGMP querier mode of a port.
auto uses the port as an IGMP query port
after it receives IGMP query packets.
fixed always uses the port as an IGMP
query port. edge stops the switch from
using the port as an IGMP query port.
inactive
Disables the specified port(s) on the switch.
ingress-check
Enables the device to discard incoming
frames for VLANs that are not included in a
port member set.
intrusion-lock
Enables intrusion lock on a port and a port
cannot be connected again after you
disconnected the cable.
mirror
Enables port mirroring on the port(s).
dir
<ingress|egress|both
>
Enables port mirroring for incoming,
outgoing or both incoming and outgoing
traffic.
Port mirroring copies traffic from one or all
ports to another or all ports for external
analysis.
multicast-
limit
Enables the port(s) multicast limit.
<pkt/s>
Sets how many multicast packets the
port(s) receives per second.
name <port-
name-string>
Sets a name for the port(s). Enter a
descriptive name (up to nine printable
ASCII characters).
no bandwidth-limit
Disables bandwidth limit on the port(s).
broadcast-limit
Disables broadcast storm control limit on
the port(s).
dlf-limit
Disables destination lookup failure (DLF)
on the switch.
egress set <port-
list>
Sets the outgoing traffic port list for a port-
based VLAN.
flow-control
Disables flow control on the port(s).
gvrp
Disable GVRP on the port(s).
igmp-filtering
profile
Disables IGMP filtering.
igmp-group-limit
Disables IGMP group limitation.
Table 95 interface port-channel Commands (continued)
COMMAND DESCRIPTION