manualshive.com logo in svg

ZyXEL Communications OLT-1308, User Manual, Page: 253 / 314

Share
Download
ZyXEL Communications OLT-1308 User Manual Download Page 253

 Chapter 37 Introducing the Commands

OLT-1308 Series User’s Guide

253

mac-filter mac <mac-
addr> vlan <vlan-id>  

Disables the specified MAC 

filter rule.

inactive

Enables the specified MAC-

filter rule.

mac-forward mac <mac-
addr> vlan <vlan-id> 
interface <interface-
id>

Removes the specified MAC 

forwarding entry, belonging to a 

VLAN group (if any) forwarded 

through an interface(s).

inactive

Enables the specified MAC 

address, belonging to a VLAN 

group (if any) forwarded 

through an interface(s).

mirror-port

Disables port mirroring on the 

switch.

mvr <vlan-id>

Disable MVR on the switch. 

policy <name>

 

Deletes the specified policy. A 

policy sets actions for the 

classified traffic. 

inactive

Enables a policy.

port-access-
authenticator 

Disables port authentication on 

the OLT.

<port-list>

Disables authentication on the 

listed ports.

port-security  

Disables port security on the 

OLT.

<port-list>

Disables port security on the 

specified ports.

<port-list>learn 
inactive

Enables MAC address learning 

on the specified ports.

priority-profile <name>

Disables the priority profile. 

radius-server

Disables the use of 

authentication from the 

RADIUS server.

remote-management 
<index>

Clears a secure client set entry 

from the list of secure clients.

service <[telnet] 
[ftp] [http] 
[icmp] [snmp] 
[ssh] [https]>

Disables a secure client set 

entry number from using the 

selected remote management 

service(s). 

service <name> <port-
list>

Disables the specific service 

profile on the PON port(s).

service-control

ftp

Disables FTP access to the 

OLT.

http

Disables web browser control 

to the OLT.

https

Disables secure web browser 

access to the OLT.

Table 91   

Command Summary: Configuration Mode  (continued)

COMMAND

DESCRIPTION

Summary of Contents for OLT-1308



























































































































































































































































































































Reviews:

No comments