ZyXEL Communications OLT-1308, User Manual, Page: 257 / 314

Chapter 37 Introducing the Commands
OLT-1308 Series User’s Guide
257
start-addr <ip>
end-addr <ip>
service
[telnet][ftp][http
][icmp][snmp]
Specifies a group of trusted
computer(s) from which an
administrator may use a
service to manage the OLT.
service-control ftp <socket-number>
Allows FTP access on the
specified service port.
http <socket-number>
<timeout>
Allows HTTP access on the
specified service port and
defines the timeout period.
https <socket-number>
Allows HTTPS access on the
specified service port.
icmp
Allows ICMP access for
services like Ping.
snmp
Allows SNMP management.
ssh <socket-number>
Allows SSH access on the
specified service port.
telnet <socket-number>
Allows Telnet access on the
specified service port.
snmp-server [contact <system
contact>] [location
<system location>]
Sets the geographic location
and the name of the person in
charge of this OLT.
get-community
<property>
Sets the get community.
set-community
<property>
Sets the set community.
trap-community
<property>
Sets the trap community.
trap-destination <ip>
Sets the IP addresses of up to
four stations to send your
SNMP traps to.
spanning-tree
Enables STP on the switch.
<port-list>
Enables STP on a specified
port.
<port-list> path-cost
<1-65535>
Sets the STP path cost for a
specified port.
<port-list> priority
<0-255>
Sets the priority for a specified
port.
hello-time <1-10>
maximum-age <6-40>
forward-delay <4-30>
Sets Hello Time, Maximum Age
and Forward Delay.
help
Displays command help
information.
priority <0-61440>
Sets the bridge priority of the
switch.
Table 91 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION