ZyXEL Communications OLT-1308, User Manual, Page: 269 / 314

Chapter 37 Introducing the Commands
OLT-1308 Series User’s Guide
269
37.10.12 vlan-profile Commands
The following table lists the
vlan-profile
commands in configuration mode.
forbidden
<port-list>
Sets forbidden port(s) to normal port(s).
inactive
Enables the specified VLAN.
ip address <ip-
address> <mask>
Deletes the IP address and subnet mask in this
VLAN.
ip address
default-
gateway
Deletes the default gateway in this VLAN.
ip address
inband-default
dhcp-bootp
Sets the default in-band interface to use a static IP
address in this VLAN.
The switch will use the default IP address of 0.0.0.0
if you do not configure a static IP address.
untagged <port-
list>
Specifies the port(s) you want to tag all outgoing
frames transmitted with this VLAN Group ID.
normal <port-
list>
Specifies the port(s) to dynamically join this VLAN
group using GVRP
untagged <port-
list>
Specifies the port(s) you don’t want to tag all
outgoing frames transmitted with this VLAN Group
ID.
Table 99 vlan Commands (continued)
COMMAND DESCRIPTION
Table 100 vlan-profile Commands
COMMAND DESCRIPTION
vlan-
profile
<name>
Creates a new VLAN profile and
enters the vlan-profile
command mode.
active
Enables this VLAN profile.
downstream rule <1-7> action <delete|
exchange| none>
Creates a profile and sets the action
for a downstream traffic.
active
Enables a rule.
new-vid <1-4094>
Specifies a new VLAN ID for the rule.
no active
Disables a rule.
priority-src
<original| priority-
profile>
Specifies to use the packet’s original
priority or change base on the priority
profile setting.
type <ethertype|
ipv4| vlan>
Sets the rule type.
value ethertype:<0-
65295>|ipv4:<1-
255>|vlan:<1-4094>
Specifies the Ethernet type or the
protocol number for the rule.