ZyXEL Communications NXC-8160, User Manual

Page: 54 / 205

Chapter 4 WLAN Settings
NXC-8160 User’s Guide
54
The following table describes the labels in this screen.
4.2.3 Renaming ESSIDs
Click the Rename button in the WLAN > ESSID Definition > ESSID Settings screen to
change a currently selected ESSID. The ESSID Table screen opens.
"
If you rename an ESSID, all currently connected wireless clients will be
suddenly disconnected. They must use the new ESSID in order to re-connect.
Figure 20 WLAN > ESSID Definition > SSID Table
Table 15 Security: WPA-Enterprise/WPA2-Enterprise
LABEL DESCRIPTION
Method Select WPA-Enterprise/WPA2-Enterprise from the drop-down list.
Group Rekey
Interval This is the rate at which the RADIUS server sends a new group key out to all
clients. The re-keying process is the WPA equivalent of automatically changing the
WEP key for an AP and all stations in a WLAN on a periodic basis. Enter a time
interval between 0 and 3600 seconds.
RADIUS Server
(1-4) The NXC-8160 can use an external RADIUS server to authenticate users. .
RADIUS servers are checked in order from 1 to 4 (for example, if server 1 is not
found or authentication fails then the NXC-8160 tries server 2, and so on).
Select a RADIUS server from the list. You can configure a list of RADIUS servers
on the
WLAN > ESSID Definition > RADIUS screen. For more information, see
Section 4.4 on page 56 .
WPA2 Only Select this option to only allow clients that support WPA2 to connect wirelessly to
the NXC-8160 network.
TKIP Only Select this option to only allow clients that support TKIP to connect wirelessly to the
NXC-8160 network.