manualshive.com logo in svg

ZyXEL Communications nwa series, User Manual

Share
Download
ZyXEL Communications nwa series User Manual Download Page 48

Chapter 3 Hardware

NWA/WAC/WAX Series User’s Guide

48

Green

Steady On

The Zyxel Device is ready for use, the Zyxel Device’s wireless 
interface is activated, and/or WiFi clients are connected to 
the Zyxel Device in full power mode (see 

Table 28 on page 

76

).

Amber

Steady On

The Zyxel Device is ready for use in limited power mode

 

(see 

Table 28 on page 76

), the Zyxel Device’s wireless interface is 

activated, and/or WiFi clients are connected to the Zyxel 
Device.

Note: WiFi networks on the WAX650S are turned off 

automatically when it is connected to a device 
that supplies power using IEEE 802.3af PoE.

Bright Blue

Steady On

The Zyxel Device’s wireless interface is activated, but there 
are no WiFi clients connected when it is in full power mode 
(see 

Table 28 on page 76

).

White

Slow Blinking (On for 
100ms per second)

Locator LED is on. It switches off automatically after the 
configured amount of time (1-60 min). Default duration is 10 
minutes.

Note: The color of the white LED may have slight 

differences (for example, very light purple) on 
different models. 

Blue

Slow Blinking (Blink for 1 
time, Off for 1 second)

The Zyxel Device is performing a Channel Availability Check 
(CAC) with Dynamic Frequency Selection (DFS) to monitor a 
channel for radar signals.

Red

On

The Zyxel Device failed to boot up or is experiencing system 
failure.

Fast Blinking (On for 50 
milliseconds, Off for 50 
milliseconds)

The Zyxel Device is undergoing firmware upgrade.

Slow Blinking (Blink for 3 
times, Off for 3 seconds)

The uplink of the Zyxel Device is disconnected.

Table 13   WAC500, WAC500H, NWA1123ACv3, NWA110AX, NWA210AX, WAX510D, WAX610D, WAX630S 

and WAX650S LED (continued)

COLOR

STATUS

DESCRIPTION

Summary of Contents for nwa series














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands