Chapter 9 Network
NWA/WAC/WAX Series User’s Guide
107
• The
NCC
Discovery
screen (
) configures the Zyxel Device’s Nebula Control
Center (NCC) discovery settings.
9.2 IP Setting
Use this screen to configure the IP address for your Zyxel Device. To access this screen, click
Configuration > Network > IP Setting
.
Figure 64
Configuration > Network > IP Setting
Each field is described in the following table.
Table 39 Configuration > Network > IP Setting
LABEL
DESCRIPTION
IP Address Assignment
Get
Automatically
Select this to make the interface a DHCP client and automatically get the IP address,
subnet mask, and gateway address from a DHCP server.
Use Fixed IP
Address
Select this if you want to specify the IP address, subnet mask, and gateway manually.
IP Address
Enter the IP address for this interface.
Subnet Mask
Enter the subnet mask of this interface in dot decimal notation. The subnet mask indicates
what part of the IP address is the same for all computers in the network.
Gateway
Enter the IP address of the gateway. The Zyxel Device sends packets to the gateway when
it does not know how to route the packet to its destination. The gateway should be on the
same network as the interface.
DNS Server IP
Address
Enter the IP address of the DNS server.
IPv6 Address Assignment
