manualshive.com logo in svg

ZyXEL Communications nwa series, User Manual

Share
Download
ZyXEL Communications nwa series User Manual Download Page 56

Chapter 3 Hardware

NWA/WAC/WAX Series User’s Guide

56

3.4.4  WAC6103D-I 

The following are the LED descriptions for your WAC6103D-I.

Management

Green

On

The Zyxel Device is managed by a the NCC or an AC.

Slow Blinking (Blink for 3 
times, Off for 3s)

The Zyxel Device is searching (discovery) for an AC.

Slow Blinking (On for 1s, 
Off for 1s)

The Zyxel Device is using default WiFi settings, or the Zyxel 
Device is connected to the NCC but is unregistered with 
the NCC.

Off

The Zyxel Device is in standalone mode.

Amber

Blinks between amber 
and green alternately 
(1 second interval). 

The Zyxel Device is searching (discovery) for the NCC.

Green

Amber

Blinks between amber 
and green alternately 3 
times and then turns 
solid green for 3 
seconds.

The NCC is connecting to the registered Zyxel Device.

Green

WLAN

Green

On

The 2.4 GHz WLAN is active.

Off

The 2.4 GHz WLAN is not active.

WLAN

Green

On

The 5 GHz WLAN is active.

Off

The 5 GHz WLAN is not active.

UPLINK

Amber

On

The port is operating as a 100 Mbps connection.

Blinking

The Zyxel Device is sending/receiving data through the 
port at 100 Mbps.

Green

On

The port is operating as a Gigabit connection (1000 
Mbps).

Blinking

The Zyxel Device is sending/receiving data through the 
port at 1 Gbps.

Off

The port is not connected.

LAN

Amber

On

The port is operating as a 100 Mbps connection.

Blinking

The LAN port is sending/receiving data through the port 
at 100 Mbps.

Green

On

The port is operating as a Gigabit connection (1000 
Mbps).

Blinking

The LAN port is sending/receiving data through the port 
at 1 Gbps.

Off

The LAN port is not connected.

 Locator

White

Blinking

The Locator is activated and will blink to show the actual 
location of the Zyxel Device between several devices in 
the network.

Off

The Locator function is off.

Table 17   WAC6502D-E, WAC6502D-S, or WAC6503D-S LEDs (continued)

LED

COLOR

STATUS

DESCRIPTION

Summary of Contents for nwa series














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands