Chapter 18 Log and Report
NWA/WAC/WAX Series User’s Guide
222
The following table describes the labels in this screen.
18.3 Log Setting
These screens control log messages and alerts. A log message stores the information for viewing (for
example, in the
Monitor > View Log
screen) or regular e-mailing later, and an alert is e-mailed
immediately. Usually, alerts are used for events that require more serious attention, such as system errors
and attacks.
The Zyxel Device provides a system log and supports e-mail profiles and remote syslog servers. The
system log is available on the
View Log
screen, the e-mail profiles are used to mail log messages to the
specified destinations, and the other four logs are stored on specified syslog servers.
Table 93 Configuration > Log & Report > Email Daily Report
LABEL
DESCRIPTION
General Settings
Enable Email
Daily Report
Select this to send reports by e-mail every day.
Email Settings
Mail Server
Type the name or IP address of the outgoing SMTP server.
SSL/TLS
Encryption
Select
SSL/TLS
to use Secure Sockets Layer (SSL) or Transport Layer Security (TLS) if you want
encrypted communications between the mail server and the Zyxel Device.
Select
STARTTLS
to upgrade a plain text connection to a secure connection using SSL/TLS.
Select
No
to not encrypt the communications.
Mail Server Port
Enter the same port number here as is on the mail server for mail traffic.
Mail Subject
Type the subject line for the outgoing e-mail. Select
Append system name
to add the Zyxel
Device’s system name to the subject. Select
Append date time
to add the Zyxel Device’s
system date and time to the subject.
Mail From
Type the e-mail address from which the outgoing e-mail is delivered. This address is used in
replies.
Mail To
Type the e-mail address (or addresses) to which the outgoing e-mail is delivered.
SMTP
Authentication
Select this check box if it is necessary to provide a user name and password to the SMTP server.
User Name
This box is effective when you select the
SMTP Authentication
check box. Type the user name to
provide to the SMTP server when the log is e-mailed.
Password
This box is effective when you select the
SMTP Authentication
check box. Type the password to
provide to the SMTP server when the log is e-mailed.
Send Report
Now
Click this button to have the Zyxel Device send the daily e-mail report immediately.
Schedule
Time for sending
report
Select the time of day (hours and minutes) when the log is e-mailed. Use 24-hour notation.
Report Items
Select the information to include in the report. Select
Reset counters after sending report
successfully
if you only want to see statistics for a 24 hour period.
Reset All
Counters
Click this to discard all report data and start all of the counters over at zero.
Apply
Click
Apply
to save your changes back to the Zyxel Device.
Reset
Click
Reset
to return the screen to its last-saved settings.
