manualshive.com logo in svg

ZyXEL Communications nwa series, User Manual

Share
Download
ZyXEL Communications nwa series User Manual Download Page 135

 Chapter 11 Bluetooth

NWA/WAC/WAX Series User’s Guide

135

11.2  Bluetooth Advertising Settings

The Zyxel Device communicates with another BLE enabled device for advertisements. Use this screen to 
configure up to five beacon IDs to be included in the advertising packet.

To access this screen, click 

Configuration > Bluetooth > Advertising Settings

.

Figure 87   

Configuration > Bluetooth > Advertising Settings

The following table describes the labels in this screen.

11.2.1  Edit Advertising Settings

Select an entry in the 

Configuration > Bluetooth > Advertising Settings

 screen and click the 

Edit

 icon to 

open the 

Edit Advertising 

screen. Use this screen to configure the beacon ID in the Bluetooth advertising 

packets.

Table 49   Configuration > Bluetooth > Advertising Settings

LABEL

DESCRIPTION

Edit

Click this to edit the selected entry.

Activate

To turn on an entry, select it and click 

Activate

.

Inactivate

To turn off an entry, select it and click 

Inactivate

.

#

This field is a sequential value, and it is not associated with a specific entry.

Status

This field shows whether or not the entry is activated.

A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not active.

UUID

This field indicates the UUID to be included in the Bluetooth advertising packets.

Major

This field indicates the major number to be included in the Bluetooth advertising packets.

Minor

This field indicates the minor number to be included in the Bluetooth advertising packets.

Apply

Click 

Apply

 to save your changes back to the Zyxel Device.

Reset

Click 

Reset

 to return the screen to its last-saved settings.

Summary of Contents for nwa series














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands