manualshive.com logo in svg

ZyXEL Communications nwa series, User Manual

Share
Download
ZyXEL Communications nwa series User Manual Download Page 45

 Chapter 3 Hardware

NWA/WAC/WAX Series User’s Guide

45

3.3.3  NWA5123-AC

Figure 18   

NWA5123-AC LED

The following are the LED descriptions for your NWA5123-AC.

Table 12   NWA5123-AC LED

COLOR

STATUS

DESCRIPTION

Amber

Blinks between amber 
and green alternately (1 
second interval).

The Zyxel Device is booting up.

Green

Amber

Blinks between amber 
and green alternately 3 
times and then turns solid 
green for 3 seconds.

The Zyxel Device is discovering an AC.

Green

Amber

Blinks between amber 
and green alternately 2 
times and then turns solid 
green for 3 seconds.

The Zyxel Device is managed by an AC and the uplink 
interface is down.

Green

Green

On

The Zyxel Device is ready for use and its wireless interface is 
activated.

Slow Blinking (On for 1s, 
Off for 1s)

The wireless module of the Zyxel Device is disabled or failed, 
or the Zyxel Device is using default WiFi settings.

Fast Blinking (On for 50ms, 
Off for 50ms)

The Locator LED is on.

Amber

On

The Zyxel Device is powered up.

Summary of Contents for nwa series














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands