manualshive.com logo in svg

ZyXEL Communications nwa series, User Manual

Share
Download
ZyXEL Communications nwa series User Manual Download Page 47

 Chapter 3 Hardware

NWA/WAC/WAX Series User’s Guide

47

Figure 20   

WAC500H LED

The following are the LED descriptions for your WAC500, WAC500H, NWA1123ACv3, NWA110AX, 
NWA210AX, WAX510D, WAX610D, WAX630S and WAX650S.

Table 13   WAC500, WAC500H, NWA1123ACv3, NWA110AX, NWA210AX, WAX510D, WAX610D, WAX630S 

and WAX650S LED

COLOR

STATUS

DESCRIPTION

Amber

Blinks between amber 
and green alternately (1 
second interval).

The Zyxel Device is booting up or is connecting with NCC.

Green

Amber

Blinks between amber 
and green alternately 3 
times and then turns solid 
green for 3 seconds.

The Zyxel Device is discovering the NCC or an AC.

Green

Amber

Blinks between amber 
and green alternately 2 
times and then turns solid 
green for 3 seconds.

The Zyxel Device is managed by an AC but the uplink is 
disconnected.

Green

Green

Slow Blinking (On for 1 
second, Off for 1 second)

The wireless module of the Zyxel Device is disabled or fails, the 
Zyxel Device is using default WiFi settings, or the Zyxel Device is 
configured to be managed by NCC but is not yet registered 
with the NCC.

Note: WiFi networks on the WAX650S are turned off 

automatically when it is connected to a device 

that supplies power using IEEE 802.3af PoE.

Summary of Contents for nwa series














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands