Chapter 17 System
NWA/WAC/WAX Series User’s Guide
214
17.6.5 Examples of Secure Telnet Using SSH
This section shows two examples using a command interface and a graphical interface SSH client
program to remotely access the Zyxel Device. The configuration and connection steps are similar for
most SSH client programs. Refer to your SSH client program user’s guide.
17.6.5.1 Example 1: Microsoft Windows
This section describes how to access the Zyxel Device using the Secure Shell Client program.
1
Launch the SSH client and specify the connection information (IP address, port number) for the Zyxel
Device.
2
Configure the SSH client to accept connection using SSH version 2.
3
A window displays prompting you to store the host key in you computer. Click
Yes
to continue.
Figure 133
SSH Example 1: Store Host Key
Enter the password to log in to the Zyxel Device. The CLI screen displays next.
17.6.5.2 Example 2: Linux
This section describes how to access the Zyxel Device using the OpenSSH client program that comes
with most Linux distributions.
1
Enter “
ssh –2 192.168.1.2
” at a terminal prompt and press
[ENTER]
. This command forces your
computer to connect to the Zyxel Device using SSH version 1. If this is the first time you are connecting to
the Zyxel Device using SSH, a message displays prompting you to save the host information of the Zyxel
Device. Type “
yes
” and press
[ENTER]
.
Then enter the password to log in to the Zyxel Device.
