Chapter 13 AP Profile
NWA/WAC/WAX Series User’s Guide
172
13.5 MAC Filter List
This screen allows you to create and manage security configurations that can be used by your SSIDs. To
access this screen click
Configuration > Object > AP Profile > SSID > MAC Filter List
.
Note: You can have a maximum of 32 MAC filtering profiles on the Zyxel Device.
Radius Server IP
Address
Enter the IP address of the RADIUS server to be used for authentication.
Radius Server Port
Enter the port number of the RADIUS server to be used for authentication.
Radius Server Secret Enter the shared secret password of the RADIUS server to be used for authentication.
Primary / Secondary
Accounting Server
Activate
Select the check box to enable user accounting through an external authentication
server.
Accounting Server
IP Address
Enter the IP address of the external accounting server in dotted decimal notation.
Accounting Server
Port
Enter the port number of the external accounting server. The default port number is 1813.
You need not change this value unless your network administrator instructs you to do so
with additional information.
Accounting Share
Secret
Enter a password (up to 128 alphanumeric characters) as the key to be shared between
the external accounting server and the Zyxel Device. The key must be the same on the
external accounting server and your Zyxel Device. The key is not sent over the network.
Accounting Interim
Update
This field is available only when you enable user accounting through an external
authentication server.
Select this to have the Zyxel Device send subscriber status updates to the accounting
server at the interval you specify.
Interim Update
Interval
Specify the time interval for how often the Zyxel Device is to send a subscriber status
update to the accounting server.
General Server Settings
NAS IP Address
If the RADIUS server requires the Zyxel Device to provide the NAS (Network Access Server)
IP address attribute, enter it here.
NAS Identifier
If the RADIUS server requires the Zyxel Device to provide the NAS (Network Access Server)
identifier attribute, enter it here. The NAS identifier is to identify the source of access
request. It could be the NAS’s fully qualified domain name.
OK
Click
OK
to
save your changes back to the Zyxel Device.
Cancel
Click
Cancel
to exit this screen without saving your changes.
Table 67 Configuration > Object > AP Profile > SSID > Security List > Add/Edit Security Profile> Security
Mode: wpa3 (continued)
LABEL
DESCRIPTION
