Chapter 18 Log and Report
NWA/WAC/WAX Series User’s Guide
229
18.3.4 Active Log Summary
This
screen allows you to view and to edit what information is included in the system log, e-mail profiles,
and remote servers at the same time. It does not let you change other log settings (for example, where
and how often log information is e-mailed or remote server names). To access this screen, go to the
Log
Setting
screen, and click the
Active Log Summary
button.
Note: The
E-mail Server
fields will not appear if your Zyxel Device does not support email daily
report.
Selection
Use the
Selection
drop-down list to change the log settings for all of the log categories.
disable all logs
(red X) - do not send the remote server logs for any log category.
enable normal logs
(green check mark) - send the remote server log messages and alerts for all
log categories.
enable normal logs and debug logs
(yellow check mark) - send the remote server log
messages, alerts, and debugging information for all log categories.
#
This field is a sequential value, and it is not associated with a specific address.
Log Category This field displays each category of messages. It is the same value used in the
Display
and
Category
fields in the
View Log
tab. The
Default
category includes debugging messages
generated by open source software.
Selection
Select what information you want to log from each
Log Category
(except
All Logs
; see below).
Choices are:
disable all logs
(red X) - do not log any information from this category
enable normal logs
(green checkmark) - log regular information and alerts from this category
enable normal logs and debug logs
(yellow check mark) - log regular information, alerts, and
debugging information from this category
OK
Click this to save your changes and return to the previous screen.
Cancel
Click this to return to the previous screen without saving your changes.
Table 96 Configuration > Log & Report > Log Setting > Edit Remote Server (continued)
LABEL
DESCRIPTION
