manualshive.com logo in svg

ZyXEL Communications nwa series, User Manual

Share
Download
ZyXEL Communications nwa series User Manual Download Page 76

NWA/WAC/WAX Series User’s Guide

76

C

HAPTER

  6

Dashboard

6.1  Overview

This screen displays general device information, system status, system resource usage, and interface 
status in widgets that you can re-arrange to suit your needs. You can also collapse, refresh, and close 
individual widgets. Fields in this screen may slightly differ by models.

Figure 39   

Dashboard

The following table describes the labels in this screen.

Table 28   Dashboard

LABEL

DESCRIPTION

Widget Settings (A)

Use this link to re-open closed widgets. Widgets that are already open appear grayed out.

Refresh Time Setting 
(B)

Set the interval for refreshing the information displayed in the widget.

Refresh Now (C)

Click this to update the widget’s information immediately.

Close Widget (D)

Click this to close the widget. Use 

Widget Settings

 to re-open it.

Device Information

System Name

This field displays the name used to identify the Zyxel Device on any network. Click the icon 
to open the screen where you can change it.

Summary of Contents for nwa series














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands