![background image](http://html.mh-extra.com/html/zyxel-communications/netatlas-workgroup/netatlas-workgroup_user-manual_945615090.webp)
Chapter 8 Performance
NetAtlas Workgroup User’s Guide
90
8.2 RMON Ethernet Statistics
Use this screen to look at network traffic on an Ethernet port since the last time the switch was
reset. To open this screen, click
Performance
>
RMON
>
Ethernet Statistics
.
Rx Counters
The following fields display the types of packet counters received on this
interface.
Tx Counters
This following fields display the types of packet counters transmitted on this
interface.
Octets
Select this option to show the total number of octets received or transmitted.
Unicast Pkts
Select this option to show the total number of good unicast packets received or
transmitted that were dropped.
Non-unicast Pkts
Select this option to show the total number of good non-unicast packets received
or transmitted that were dropped.
Discard Pkts
Select this option to show the total number of packets received or transmitted that
were dropped.
Error Pkts
Select this option to show the total number of error packets received or
transmitted.
Multicast Pkts
Select this option to show the total number of good multicast packets received or
transmitted.
Broadcast Pkts
Select this option to show the total number of good broadcast packets received or
transmitted.
HC-Unicast Pkts
Select this option to show the number of unicast packets (High Capacity (HC) 64
~ 1518 octets long) dropped because they either had a bad Frame Check
Sequence (FCS) or non-integer number of octets (alignment error).
HC-Multicast Pkts
Select this option to show the number of multicast packets (High Capacity (HC) 64
~ 1518 octets long) dropped because they either had a bad Frame Check
Sequence (FCS) or non-integer number of octets (alignment error).
HC-Broadcast
Pkts
Select this option to show the number of broadcast packets (High Capacity (HC)
64 ~ 1518 octets long) dropped because they either had a bad Frame Check
Sequence (FCS) or non-integer number of octets (alignment error).
Polling
The text box displays how often (in seconds) this screen refreshes. You may
change the refresh interval by typing a new number in the text box and then
clicking
Apply
.
Close
Click
Close
to close this screen.
Reset Counters
Click
Reset Counters
to clear the counters.
Graph
Click the
Graph
button to create a graph based on the above selections.
Table
Click the
Table
button to create a table based on the above selections.
Close Click
Close
to close the screen.
Table 36
Performance: Interface (continued)
LABEL
DESCRIPTION
Summary of Contents for NetAtlas Workgroup
