ZyXEL Communications NetAtlas Workgroup User Manual Download

Page: 110 / 242

Chapter 10 Maintenance

NetAtlas Workgroup User’s Guide

110

If you chose

Restore

, the switch automatically restarts when the configuration file

upload is complete.

Click

Close

to close this screen.

Figure 70

Maintenance: Configuration Backup/Restore

The following table describes the labels in this screen.

10.4 Load Factory Default

Follow the steps below to reset a switch configuration to the factory defaults.

Click

Maintenance

Load Factory Default

Select a switch from the list of devices shown.

Table 47

Maintenance: Configuration Backup/Restore

LABEL

DESCRIPTION

Device Name

This field displays the name of each IP DSLAM. Select an IP DSLAM to look

at statistics for one of its ports.

Device IP

This field displays the corresponding IP address of the IP DSLAM.

Directory/File Name

Type the path and file name of the configuration file you wish to restore to the

switch or backup to your computer in the

Directory / File Name

text box or

click

Browse

to locate it.

Save running-config

to configuration

This field is applicable when you select

Backup

Select the

Save running-config to configuration

text box to save the most

recently updated configuration to a file specified in the

Directory/File Name

field.

Backup

Click the

Backup

radio button to transfer the configuration file from your

switch to a computer.

Restore

Click the

Restore

radio button to transfer the configuration file from your

computer to a switch.

Apply

Click

Apply

to backup or restore the switch(es) configuration file.

Click

Close

to close this screen.

Summary of Contents for NetAtlas Workgroup



















































































































































































































































Search results

Summary of Contents for NetAtlas Workgroup

Reviews:

Related manuals for NetAtlas Workgroup

Brands by name

Popular brands

ZyXEL Communications NetAtlas Workgroup, User Manual

Search results

Summary of Contents for NetAtlas Workgroup

Reviews:

Related manuals for NetAtlas Workgroup

Brands by name

Popular brands