manualshive.com logo in svg

ZyXEL Communications NetAtlas Workgroup, User Manual

The ZyXEL Communications NetAtlas Workgroup is an advanced networking tool designed to streamline and optimize business operations. Gain comprehensive insights and control over your network infrastructure with our user-friendly interface. Access the user manual for free download at manualshive.com, providing detailed instructions for seamless setup and configuration.

Share
Download
background image

 Chapter 19 IP Configuration

NetAtlas Workgroup User’s Guide

217

19.9  VRRP 

Virtual Router Redundancy Protocol (VRRP), defined in RFC 2338, allows you to create 
redundant backup gateways to ensure that the default gateway of a host is always available. 
In VRRP, a virtual router (VR) represents a number of physical layer-3 devices. An IP address 
is associated with the virtual router. A layer-3 device having the same IP address is the 
preferred master router while the other Layer-3 devices are the backup routers. The master 
router forwards traffic for the virtual router. When the master router becomes unavailable, a 
backup router assumes the role of the master router until the master router comes back up and 
takes over. 

19.9.1  Configuring Interface VRRP Settings 

Follow the steps below to configure VRRP settings on an interface. 

1

In the Device Panel list, right-click on a device.

2

Click 

Configuration > IP Configuration > VRRP

. 

Figure 160   

IP Configuration: VRRP 

Add

Click 

Add 

to apply the changes and close this screen. 

Cancel Click 

Cancel 

to discard all changes and close this screen. 

Table 121   

IP Configuration: OSPF: New Interface  (continued)

LABEL

DESCRIPTION

Summary of Contents for NetAtlas Workgroup



















































































































































































































































Reviews:

No comments

Related manuals for NetAtlas Workgroup

XenSource DL385 - ProLiant - G5 Manual preview
DL385 - ProLiant - G5
Brand: XenSource Pages: 313
MACROMEDIA BREEZE-MANAGING EXTERNAL BREEZE REPORTS Manual preview
BREEZE-MANAGING EXTERNAL BREEZE REPORTS
Brand: MACROMEDIA Pages: 18
Epson PC Free Operation Manual preview
PC Free
Brand: Epson Pages: 22
Epson Message Broadcasting Getting Started Manual preview
Message Broadcasting
Brand: Epson Pages: 9
Epson EX3200 Brochure & Specs preview
EX3200
Brand: Epson Pages: 4
Epson LQ-860 - Impact Printer Specifications preview
LQ-860 - Impact Printer
Brand: Epson Pages: 8
Epson EX3220 Product Overview And Specifications preview
EX3220
Brand: Epson Pages: 4
Epson C300011B - Stylus Pro 5500 Color Inkjet Printer Getting Started Manual preview
C300011B - Stylus Pro 5500 Color Inkjet Printer
Brand: Epson Pages: 11
Epson LQ Color driver Product Support Bulletin preview
LQ Color driver
Brand: Epson Pages: 11
Epson Photo File Uploader3 User Manual preview
Photo File Uploader3
Brand: Epson Pages: 61
Epson PowerLite 1915 Brochure & Specs preview
PowerLite 1915
Brand: Epson Pages: 4
Epson PowerLite 4200W Brochure preview
PowerLite 4200W
Brand: Epson Pages: 6
Epson EX5200 Quick Setup Manual preview
EX5200
Brand: Epson Pages: 4
Epson PowerLite 1880 Specifications preview
PowerLite 1880
Brand: Epson Pages: 6
Epson C82357 User Manual preview
C82357
Brand: Epson Pages: 57
Epson C31C489111 - TM J7000P B/W Inkjet Printer User Manual preview
C31C489111 - TM J7000P B/W Inkjet Printer
Brand: Epson Pages: 149
Epson MACLQ (Talk I/F for LQ Printers) User Manual preview
MACLQ (Talk I/F for LQ Printers)
Brand: Epson Pages: 65
Epson PowerLite 1222 User Manual preview
PowerLite 1222
Brand: Epson Pages: 204

Brands by name

Popular brands

Load more brands