![background image](http://html.mh-extra.com/html/zyxel-communications/netatlas-workgroup/netatlas-workgroup_user-manual_945615215.webp)
Chapter 19 IP Configuration
NetAtlas Workgroup User’s Guide
215
Figure 158
IP Configuration: OSPF: New Virtual Link
The following table describes the labels in this screen.
19.8.6 Configuring a New OSPF Interface
Follow the steps below to create a new OSPF interface.
1
In the Device Panel list, right-click on a device.
Table 120
IP Configuration: OSPF: New Virtual Link
LABEL
DESCRIPTION
Name
Enter a descriptive name (up to 32 printable ASCII characters) for identification
purposes.
Area ID
Select the area ID (that uses the format of an IP address in dotted decimal
notation) of an area to associate the interface to that area.
Peer Router ID
Enter the ID of a peer border router.
Authentication
Note: Virtual interface(s) must use the same authentication
method within the same area.
Select an authentication method. Choices are
Same-as-Area
,
None
(default),
Simple
and
MD5
.
To exchange OSPF packets with peer border router, you must set the
authentication method and/or password the same as the peer border router.
Select
Same-as-Area
to use the same authentication method within the area
and set the related fields when necessary.
Select
None
to disable authentication. This is the default setting.
Select
Simple
to authenticate OSPF packets transmitted through this interface
using a simple password.
Select
MD5
to authenticate OSPF packets transmitted through this interface
using MD5 authentication.
Key ID
When you select
MD5
in the
Authentication
field, specify the identification
number of the authentication you want to use.
Key
When you select
Simple
in the
Authentication
field, enter a password eight-
character long.
When you select
MD5
in the
Authentication
field, enter a password 16-character
long.
Add
Click
Add
to apply the changes and close this screen.
Cancel Click
Cancel
to discard all changes and close this screen.
Summary of Contents for NetAtlas Workgroup
