ZyXEL Communications NetAtlas Workgroup User Manual Download Page 182

Page: 182 / 242

Chapter 17 Multicast Configuration

NetAtlas Workgroup User’s Guide

182

The following table describes the labels in this screen.

17.2.2 Applying a Multicast Template

After you create a multicast template using the Template screen, you can apply the template to
the switch in the

Multicast Setting

screen.

When you apply a multicast template, all custom port multicast settings will be
erased.

In the

Multicast Setting

screen, select a device in the device list panel and click

Load

Template

. A screen displays as shown.

Table 94

Multicast Configuration: Multicast Settings: Modify

LABEL

DESCRIPTION

Port

This field displays the port number.

Immed. Leave

Select this option to set the switch to remove this port from the multicast tree when

an IGMP version 2 leave message is received on this port.
Select this option if there is only one host connected to this port.

Group Limited

Select this option to limit the number of multicast groups this port is allowed to join.

Max Group Num.

Enter the number of multicast groups this port is allowed to join. Once a port is

registered in the specified number of multicast groups, any new IGMP join report

frame(s) is dropped on this port.
Enter

to allow a port to join any number of multicast groups.

IGMP Filtering

Profile

Select the name of the IGMP filtering profile to use for this port. Otherwise select

Default

to prohibit the port from joining any multicast group.

IGMP Querier

Mode

The switch treats an IGMP query port as being connected to an IGMP multicast

router (or server). The switch forwards IGMP join or leave packets to an IGMP

query port.
Select

Auto

to have the switch use the port as an IGMP query port if the port

receives IGMP query packets.
Select

Fixed

to have the switch always use the port as an IGMP query port. Select

this when you connect an IGMP multicast server to the port.
Select

Edge

to stop the switch from using the port as an IGMP query port. The

switch will not keep any record of an IGMP router being connected to this port.

The switch does not forward IGMP join or leave packets to this port.

Click

to save your changes and close this screen.

Cancel

Click

Cancel

to discard all changes and close this screen.

Summary of Contents for NetAtlas Workgroup



















































































































































































































































Search results

Summary of Contents for NetAtlas Workgroup

Reviews:

Related manuals for NetAtlas Workgroup

Brands by name

Popular brands

ZyXEL Communications NetAtlas Workgroup, User Manual

Search results

Summary of Contents for NetAtlas Workgroup

Reviews:

Related manuals for NetAtlas Workgroup

Brands by name

Popular brands