ZyXEL Communications NetAtlas Workgroup User Manual Download

Page: 205 / 242

Chapter 19 IP Configuration

NetAtlas Workgroup User’s Guide

205

Figure 151

IP Configuration: DHCP: Server

The following table describes the related labels in this screen.

Click

Add

to configure DHCP client pool information.

Table 112

IP Configuration: DHCP: Server

LABEL

DESCRIPTION

Server

VID

This field displays the ID number of the VLAN group to which this DHCP settings

apply.

Type This

field

displays

Server

for the DHCP mode.

DHCP Status

This field displays the starting and the size of DHCP client IP address.

Add

Click

Add

to configure DHCP client pool settings.

Modify

Click

Modify

to change the settings of the selected DHCP client pool.

Delete

Click

Delete

to remove the selected DHCP client pool setting.

Summary of Contents for NetAtlas Workgroup



















































































































































































































































Search results

Summary of Contents for NetAtlas Workgroup

Reviews:

Related manuals for NetAtlas Workgroup

Brands by name

Popular brands

ZyXEL Communications NetAtlas Workgroup, User Manual

Search results

Summary of Contents for NetAtlas Workgroup

Reviews:

Related manuals for NetAtlas Workgroup

Brands by name

Popular brands