ZyXEL Communications NetAtlas Workgroup User Manual Download

Page: 159 / 242

Chapter 15 VLAN

NetAtlas Workgroup User’s Guide

159

15.2.1 Configuring an 802.11Q VLAN

Ports are assigned membership in a VLAN by associating a VLAN ID with the ports.
In the

VLAN Configuration

screen, click

New

Modify

to display the setup screen.

Figure 112

VLAN Configuration: 802.1Q: New or Modify

The following table describes the labels in this screen.

Modify

Click on a VLAN in the left-hand column of this screen. Change the

VLAN ID

VLAN

Name

or change the configuration of the egress, forbidden and untagged ports.

Click the

Modify

button to save the changes.

Load Template

Use a VLAN template to overwrite existing selected VLANs. Select one or more

VLANs and click the

Load Template

button. See

Section 6.2 on page 77

for more

information.

Port List

Click on a port in the

Egress Ports

list to add the selected port to the port list. If a

port is not selected from any of the three port lists, then it is a normal tagged port.

Refer to

Table 77 on page 159

for the VLAN port type descriptions.

Click

Close

to close the screen.

Table 76

VLAN Configuration: 802.1Q (continued)

LABEL

DESCRIPTION

Table 77

VLAN Configuration: 802.1Q: Modify

LABEL

DESCRIPTION

VLAN Identity

Active

Select

Active

to enable this VLAN.

VLAN ID

This field displays a unique number to identify the VLAN.

Summary of Contents for NetAtlas Workgroup



















































































































































































































































Search results

Summary of Contents for NetAtlas Workgroup

Reviews:

Related manuals for NetAtlas Workgroup

Brands by name

Popular brands

ZyXEL Communications NetAtlas Workgroup, User Manual

Search results

Summary of Contents for NetAtlas Workgroup

Reviews:

Related manuals for NetAtlas Workgroup

Brands by name

Popular brands