Chapter 6 Tutorials
MES3500 Series User’s Guide
68
6.6.1 Creating a VLAN
Follow the steps below to configure port 2, 3, 4 and 25 as a member of VLAN 123.
1
Access the web configurator through the Switch’s port which is not in VLAN 123.
2
Go to
Basic Setting > Switch Setup
and set the VLAN type to
802.1Q
. Click
Apply
to save the
settings to the run-time memory.
3
Click
Advanced Application > VLAN > Static VLAN
.
4
In the
Static VLAN
screen, select
ACTIVE
, enter a descriptive name (VLAN 123 for example) in
the
Name
field and enter 123 in the
VLAN Group ID
field.
5
Select
Fixed
to configure ports 2, 3, 4 and 25 to be permanent members of this VLAN.
6
Clear the
TX Tagging
check box to set the Switch to remove VLAN tags before sending frames out
of these ports.
7
Click
Add
to save the settings to the run-time memory. Settings in the run-time memory are lost
when the Switch’s power is turned off.
Summary of Contents for MES3500 Series
