Chapter 33 Error Disable
MES3500 Series User’s Guide
261
Figure 157
Advanced Application > Errdisable > CPU protection
The following table describes the labels in this screen.
33.6 Error-Disable Detect Configuration
Use screen to have the Switch detect whether the control packets exceed the rate limit configured
for a port and configure the action to take once the limit is exceeded. Click the
Click Here
link
next
to
Errdisable Detect
link in the
Advanced Application > Errdisable
screen to display the
screen as shown.
Table 116
Advanced Application > Errdisable > CPU protection
LABEL
DESCRIPTION
Reason
Select the type of control packet you want to configure here.
Port
This field displays the port number.
*
Use this row to make the setting the same for all ports. Use this row first and then make
adjustments to each port if necessary.
Note: Changes in this row are copied to all the ports as soon as you make them.
Rate Limit (pkt/
s)
Enter a number from 0 to 256 to specify how many control packets this port can receive or
transmit per second.
0
means no rate limit.
You can configure the action that the Switch takes when the limit is exceeded. See
for detailed information.
Apply
Click
Apply
to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the
Save
link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Summary of Contents for MES3500 Series
