Chapter 29 VLAN Mapping
MES3500 Series User’s Guide
240
Figure 142
Advanced Application > VLAN Mapping
The following table describes the labels in this screen.
29.3 Configuring VLAN Mapping
Click the
VLAN Mapping Configure
link in the
VLAN Mapping
screen to display the screen as
shown. Use this screen to enable and edit the VLAN mapping rule(s).
Table 101
Advanced Application > VLAN Mapping
LABEL
DESCRIPTION
Active
Select this option to enable VLAN mapping on the Switch.
Port
This field displays the port number.
*
Use this row to make the setting the same for all ports. Use this row first and then make
adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
Active
Select this check box to enable the VLAN mapping feature on this port. Clear this check box to
disable the VLAN mapping feature.
Apply
Click
Apply
to save your changes to the Switch’s run-time memory. The Switch loses these changes
if it is turned off or loses power, so use the
Save
link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Summary of Contents for MES3500 Series
