Chapter 37 DHCP
MES3500 Series User’s Guide
280
Figure 175
IP Application > DHCP > DHCPv4 > Global
The following table describes the labels in this screen.
37.4.4 DHCPv4 Global Relay Port Configure
Use this screen to apply a different DHCP option 82 profile to certain ports on the Switch. To open
this screen, click
IP Application > DHCP > DHCPv4 > Global > Port
.
Figure 176
IP Application > DHCP > DHCPv4 > Global > Port
Table 129
IP Application > DHCP > DHCPv4 > Global
LABEL
DESCRIPTION
Active
Select this check box to enable DHCP relay.
Remote DHCP
Server 1 .. 3
Enter the IP address of a DHCP server in dotted decimal notation.
Option 82
Profile
Select a pre-defined DHCPv4 option 82 profile that the Switch applies to all ports. The Switch
adds the Circuit ID sub-option and/or Remote ID sub-option specified in the profile to DHCP
requests that it relays to a DHCP server.
Apply
Click
Apply
to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the
Save
link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Summary of Contents for MES3500 Series
