Chapter 32 PPPoE
MES3500 Series User’s Guide
255
32.3.2 PPPoE IA Per-Port Per-VLAN
Use this screen to configure PPPoE IA settings that apply to a specific VLAN on a port.
Click the
VLAN
link in the
Intermediate Agent > Port
screen to display the screen as shown.
Server Trusted
State
Select whether this port is a trusted port (
Trusted
) or an untrusted port (
Untrusted
).
Trusted ports are uplink ports connected to PPPoE servers.
•
If a PADO (PPPoE Active Discovery Offer), PADS (PPPoE Active Discovery Session-
confirmation), or PADT (PPPoE Active Discovery Terminate) packet is sent from a PPPoE
server and received on a trusted port, the Switch forwards it to all other ports.
•
If a PADI or PADR packet is sent from a PPPoE client but received on a trusted port, the
Switch forwards it to other trusted port(s).
Untrusted ports are downlink ports connected to subscribers.
•
If a PADI, PADR, or PADT packet is sent from a PPPoE client and received on an
untrusted port, the Switch adds a vendor-specific tag to the packet and then forwards it
to the trusted port(s).
•
The Switch discards PADO and PADS packets which are sent from a PPPoE server but
received on an untrusted port.
Circuit-id
Enter a string of up to 63 ASCII characters that the Switch adds into the Agent Circuit ID
sub-option for PPPoE discovery packets received on this port. Spaces are allowed.
The Circuit ID you configure for a specific VLAN on a port (in the
Advanced Application >
PPPoE > Intermediate Agent > Port > VLAN
screen) has the highest priority.
Remote-id
Enter a string of up to 63 ASCII characters that the Switch adds into the Agent Remote ID
sub-option for PPPoE discovery packets received on this port. Spaces are allowed.
If you do not specify a string here or in the
Remote-id
field for a VLAN on a port, the
Switch automatically uses the PPPoE client’s MAC address.
The Remote ID you configure for a specific VLAN on a port (in the
Advanced Application >
PPPoE > Intermediate Agent > Port > VLAN
screen) has the highest priority.
Apply
Click
Apply
to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the
Save
link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Table 112
Advanced Application > PPPoE > Intermediate Agent > Port (continued)
LABEL
DESCRIPTION
Summary of Contents for MES3500 Series
