ZyXEL Communications MAX218M2W User Manual Download Page 67

Page: 67 / 306

Chapter 5 System Status

MAX208M2W Series User’s Guide

Connection

Status

This field displays the status of the WiMAXconnection between the
MAX208M2W Series and the base station.

Network Search - The MAX208M2W Series is scanning for any
available WiMAX connections.

Disconnected - No WiMAX connection is available.

Network Entry - A WiMAX connection is initializing.

Normal - The WiMAX connection has successfully established.

BSID

This field displays the MAC address of the base station to which the
device is connected.

Frequency

This field indicates the frequency the MAX208M2W Series is using.

Signal

Strength

This field indicates the strength of the connection that the
MAX208M2W Series has with the base station.

Link Quality

This field indicates the relative quality of the link the MAX208M2W
Series has with the base station.

WAN

Status

This field indicates the status of the WAN connection to the
MAX208M2W Series.

MAC Address

This field indicates the MAC address of the port making the WAN
connection on the MAX208M2W Series.

IP Address

This field indicates the current IP address of the MAX208M2W Series in
the WAN.

Subnet Mask

This field indicates the current subnet mask on the WAN.

Gateway

This field indicates the IP address of the gateway to which the
MAX208M2W Series is connected.

MTU

This field indicates the Maximum Transmission Unit (MTU) between the
MAX208M2W Series and the ISP servers to which it is connected.

DNS

This field indicates the Domain Name Server (DNS) to which your
MAX208M2W Series is connected.

LAN

MAC Address

This field indicates the MAC address of the port making the LAN
connection on the MAX208M2W Series.

IP Address

This field displays the current IP address of the MAX208M2W Series in
the LAN.

Subnet Mask

This field displays the current subnet mask in the LAN.

MTU

This field indicates the Maximum Transmission Unit (MTU) between the
MAX208M2W Series and the client devices to which it is connected.

VOIP Phone

Account1

Subscriber

This field displays the SIP number for SIP account 1.

Registered

Status

This field displays whether SIP account 1 is already registered with a
SIP server (Registered or Unregistered).

Account2

Subscriber

This field displays the SIP number for SIP account 2.

Table 12

Status (continued)

LABEL

DESCRIPTION

Summary of Contents for MAX218M2W



















































































































































































































































































































Search results

Summary of Contents for MAX218M2W

Reviews:

Related manuals for MAX218M2W

Brands by name

Popular brands

ZyXEL Communications MAX218M2W, User Manual

Search results

Summary of Contents for MAX218M2W

Reviews:

Related manuals for MAX218M2W

Brands by name

Popular brands