ZyXEL Communications MAX218M2W, User Manual

Page: 172 / 306

Chapter 12 Maintenance
MAX208M2W Series User’s Guide
168
12.4 Telnet
Use this screen to allow remote access to the WiMAX Device from a network
connection over Telnet.
Click Maintenance > Remote MGMT > Telnet to open this screen as shown
next.
Figure 83 Telnet Screen
This screen contains the following fields:
12.5 SSH
Use this screen to allow remote access to the WiMAX Device from a network
connection over SSH.
Click Maintenance > Remote MGMT > SSH to open this screen as shown next.
Figure 84 SSH Screen
Table 64 Telnet
LABEL DESCRIPTION
Enable Select this to enable remote management using this service.
Port Number Enter the port number this service can use to access the MAX208M2W
Series. The computer must use the same port number.
Allow
Connection
from WAN Select this to allow connections using this service that originate on the
WAN.
Allow
Connection
from LAN Select this to allow connection using this service that originate on the
LAN.