ZyXEL Communications MAX218M2W, User Manual

Page: 183 / 306

Chapter 12 Maintenance
MAX208M2W Series User’s Guide
179
12.15 Restore
Use this screen to restore your WiMAX Device settings from a backup file on a
local computer.
Click Maintenance > Backup/Restore > Restore to open this screen as shown
next.
Figure 94 Restore Screen
This screen contains the following fields:
12.15.1 The Restore Configuration Process
When the MAX208M2W Series restores a configuration file, the device
automatically restarts. This causes a temporary network disconnect.
Note: Do not turn off the device while configuration file upload is in progress.
If the MAX208M2W Series’s IP address is different in the configuration file you
selected, you may need to change the IP address of your computer to be in the
same subnet as that of the default management IP address (192.168.5.1). See
the Quick Start Guide or the appendices for details on how to set up your
computer’s IP address.
You might have to open a new browser to log in again.
Table 75 Restore
LABEL DESCRIPTION
Configuration
File Click Choose File then browse to the location of a firmware upgrade
file and select it.
Click File Restore to upload the specified configuration to the
MAX208M2W Series and replace the current settings.
Backup
Configuration
File URL Enter the URL or IP address of the backup configuration file’s location
on the network.
Click URL Restore to upload the specified configuration to the
MAX208M2W Series and replace the current settings.