ZyXEL Communications MAX218M2W, User Manual

Page: 35 / 306

Chapter 3 Setup Wizard
MAX208M2W Series User’s Guide
33
The following table describes the labels in this screen.
Table 7 Setup Wizard > WiMAX Frequency Settings
LABEL DESCRIPTION
Setting Type Select the WiMAX frequency setting type from the list.
• By Range - Select this to set up the frequency based on a range
of MHz.
• By List - Select this to set up the frequency on an individual
MHz basis. You can add multiple MHz values to the list.
Step Enter the increments in MHz by which to increase the frequency
range.
Note: This field only appears when you select By Range under
Setting Type .
Start Frequency Enter the frequency value at the beginning of the frequency range
to use. The frequency is increased in increments equal to the Step
value until the End Frequency is reached, at which time the cycle
starts over with the Start Frequency.
Note: This field only appears when you select By Range under
Setting Type .
End Frequency Enter the frequency value at the end of the frequency range to use.
Note: This field only appears when you select By Range under
Setting Type .
Bandwidth Set the frequency bandwidth in MHz that this MAX208M2W Series
uses.
# This is an index number for enumeration purposes only.
Frequency (MHz) Displays the frequency MHz for the item in the list.
Total Num Displays the total number of items in the list.
Delete Click this to remove an item from the list.
Add Click this to add an item to the list.
OK Click this to save an newly added item to the list.
# This is an index number for enumeration purposes only.
Band Start (KHz) Indicates the beginning of the frequency band in KHz.
Band End (KHz) Indicates the end of the frequency band in KHz.
Total Num Displays the total number of items in the list.
Back Click to display the previous screen.
Next Click to proceed to the next screen.