ZyXEL Communications MAX218M2W, User Manual

Page: 128 / 306

Chapter 7 Network Setting
MAX208M2W Series User’s Guide
126
7.21 Content Filter
Use these settings to allow ("whitelist") or block ("blacklist") connections to and
from specific web sites through the WiMAX Device.
Click Network Setting > Content Filter to open this screen as shown next.
Figure 57 Content Filter Screen
This screen contains the following fields:
Backup MX Select this to enable a secondary mail routing, if supported by the
specified DYNDNS service provider.
MX Host Enter the host to which mail is routed when the MX option is selected.
Table 43 DDNS (continued)
LABEL DESCRIPTION
Table 44 Content Filter
LABEL DESCRIPTION
URL List
Enable URL
Filter
Select this employ the content filter to allow (“whitelist”) or block
(“blacklist”) specific URL connections made through the MAX208M2W
Series.
Blacklist/
Whitelist
Select whether the current filtering applies to the blacklist (sites that
are blocked) or the whitelist (sites that are allowed).
URL Filter Rule
Active
Indicates whether the current URL filter is active or not.
URL Indicates the URL to be filtered according to blacklist or whitelist rules.
Delete Click this to delete a specified rule.
Add Click this to add a new filter rule.
OK Click this to save any changes made to the list.