ZyXEL Communications MAX218M2W, User Manual

Page: 154 / 306

Chapter 10 The VoIP Account Screens
MAX208M2W Series User’s Guide
152
10.6 Dialing
Click VoIP > Account 1 (or Account 2) > Dialing to configure dialing timeout
values.
Figure 71 VoIP > Account 1 (or Account 2) > Dialing
The following table describes the labels in this screen.
10.7 Speed Dial
Click VoIP > Account 1 (or Account 2) > Speed Dial to add, edit, or remove
speed-dial rules.
Figure 72 VoIP > Account 1 (or Account 2) > Speed Dial
The following table describes the labels in this screen.
Table 54 VoIP > Account 1 (or Account 2) > Dialing
LABEL DESCRIPTION
Inter-digit
Timeout
Enter the maximum number of seconds (1~5) the MAX208M2W
Series waits for each digit input of a complete callee number after you
press the flash key on the phone. If the MAX208M2W Series cannot
receive the next digit entered within this time period, the
MAX208M2W Series processes digits you have dialed.
First-digit
Timeout
Set the number of seconds (5~30) for the MAX208M2W Series to wait
for you to start dialing a number after you pick up the telephone
receiver. If you do not dial any number within that time period, the
dial tone becomes a busy signal. Put back the receiver and pick it up
again if you want to make a new call.
Table 55 VoIP > Account 1 (or Account 2) > Speed Dial
LABEL DESCRIPTION
Speed Dial Status
Enable
Select this to enable speed dial on the MAX208M2W Series.
Speed Dial Rules - This is a list of speed dial numbers.