Chapter 7 WAN
LTE3316 Series User’s Guide
64
7.7 PIN Management
Use this screen to enable PIN authentication and configure the PIN code. Click
Configuration > Network
> WAN > PIN Management
from the Configuration menu.
Figure 26
Configuration > Network > WAN > PIN Management
Secondary DNS
Address
Enter the second IPv6 DNS server address assigned by the ISP.
LAN IPv6 Address
Enter the IPv6 address for the Zyxel Device LAN interface in this field.
LAN IPv6 Link-Local
Address
This shows the IPv6 Link-local address in the LAN side. This is used by Zyxel Device when
communicating with neighboring devices on the same link. It allows IPv6-capable
devices to communicate with each other in the LAN side.i
Auto configuration
Click
Enable
if you want the devices on your local area network to obtain network
address that are not managed by a DHCPv6 server. Otherwise, select
Disable
.
Auto configuration
Type
Select
Stateless
if you want the Zyxel Device interface to automatically generate a link-
local address via stateless auto configuration.
Select
Stateful (DHCPv6)
when the devices connected to your LAN needs to have their
TCP/IP configuration set to DHCPv6 or obtain an IPv6 address automatically.
IPv6 Address Range
(Start)
If you select
Stateful (DHCPv6)
, specify the range of IPv6 addresses from which the
DHCPv6 server assigns to the clients. Enter the smallest value of the last block of the IPv6
addresses which are to be allocated.
IPv6 Address Range
(End)
If you select
Stateful (DHCPv6)
, specify the range of IPv6 addresses from which the
DHCPv6 server assigns to the clients. Enter the largest value of the last block of the IPv6
addresses which are to be allocated.
IPv6 Address Lifetime
If you select
Stateful (DHCPv6)
, specify how long (in minutes) the IPv6 addresses remain
valid.
Table 15 Configuration > Network >WAN > IPv6 (continued)
LABEL
DESCRIPTION
Summary of Contents for LTE3316-M604
Page 12: ...12 PART I User s Guide...
Page 40: ...40 PART II Technical Reference...
