Chapter 11 NAT
LTE3316 Series User’s Guide
96
• Use the
Port Trigger
screen to change your Zyxel Device’s trigger port settings (
• Use the
ALG
screen to enable or disable SIP (VoIP) ALG (Application Layer Gateway) in the Zyxel
Device (
11.2 General Settings
Use this screen to enable NAT and set a default server. Click
Configuration > Network > NAT
to open the
General
screen.
Figure 48
Configuration > Network > NAT > General
The following table describes the labels in this screen.
11.3 Port Forwarding
Use this
screen to forward incoming service requests to the server(s) on your local network and set a
default server. You may enter a single port number or a range of port numbers to be forwarded, and the
local IP address of the desired server. The port number identifies a service; for example, web service is on
Table 34 Configuration > Network > NAT > General
LABEL
DESCRIPTION
Network Address
Translation (NAT)
Network Address Translation (NAT) allows the translation of an Internet protocol address
used within one network (for example a private IP address used in a local network) to a
different IP address known within another network (for example a public IP address used on
the Internet).
Select
Enable
to activate NAT. Select
Disable
to turn it off.
NAT Loopback
NAT loopback allows local users to use a domain name to access a server on the local
network. A packet sent to the public (WAN) IP address is always forwarded to the default
gateway (the Zyxel Device). With NAT loopback enabled, the Zyxel Device uses the WAN
interface’s IP address as the packet’s source address and treats the packet as if it came
from the WAN interface. The packet then can be forwarded to the local server according
to the port forwarding rule.
Select
Enable
to activate NAT loopback. Select
Disable
to turn it off.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Apply
Click
Apply
to save your changes back to the Zyxel Device.
Summary of Contents for LTE3316-M604
Page 12: ...12 PART I User s Guide...
Page 40: ...40 PART II Technical Reference...