ZyXEL Communications LTE3316-M604, User Manual

Page: 50 / 193

Chapter 6 Monitor
LTE3316 Series User’s Guide
50
The following table describes the labels on this screen.
Table 10 Monitor > LTE Modem Status
LABEL DESCRIPTION
Modem Information
Module Name This displays the name of the built-in LTE module.
IMEI/MEID This displays the International Mobile Equipment Number (IMEI) or Mobile Equipment
Identifier (MEID), which is the serial number of the built-in LTE module. It is a unique
15-digit number used to identify a mobile device.
HW Version This displays the hardware version of the built-in LTE module.
FW Version This displays the firmware version of the built-in LTE module.
SIM Status
PIN Code Status This displays the status of PIN code authentication.
PIN Code Remaining Times This displays how many times you can enter the PIN code.
PUK Code Remaining Times This displays how many times you can enter the PUK code.
Service Information
Operator This displays the name of the service provider.
Cell Broadcast This displays whether the one-to-many messaging service is available.
MCC This displays the Mobile Country Code (MCC), which is used to identify the country
of a mobile subscriber.
MNC This displays the Mobile Network Code (MNC), which is used in combination with
MCC to identify the public land mobile network (PLMN) of a mobile subscriber.
LAC This displays the 2-octet Location Area Code (LAC), which is used to identify a
location area within a PLMN.
TAC This displays the Tracking Area Code (TAC), which is to identify a tracking area within
a PLMN.
Cell ID This displays the ID of a cell at the physical layer.
Service Type This displays the type of the mobile network to which the Zyxel Device is connecting.
Operation Band This displays the network type and the frequency band used by the mobile network
to which the Zyxel Device is connecting.
RSSI This displays the received signal strength indicator (RSSI), that is, the received signal
strength in dBm.
CS Register Status This displays the Circuit Switched (CS) network registration status.
Eclo This displays the ratio (in dB) of the received energy per chip and the interference
level.
PS Register Status This displays the Packet Switched (PS) network registration status.
PS Attached Status This displays the Packet switched Domain Attachment status.
Roaming Status This displays whether the Zyxel Device is connected to another service provider’s
mobile network using roaming.
IMSI This displays the International Mobile Subscriber Identity (IMSI) stored in the SIM
(Subscriber Identity Module) card. The SIM card is installed in a mobile device and
used for authenticating a customer to the carrier network. IMSI is a unique 15-digit
number used to identify a user on a network.
SMSC This displays the number for Short Message Service Center (SMSC), which stores,
forwards and delivers SMS text message.
MSISDN This displays the MSISDN (Mobile Subscriber ISDN) number, a phone number assigned
to a mobile subscriber to call a mobile device.